22.00 €Original price was: 22.00 €.16.00 €Η τρέχουσα τιμή είναι: 16.00 €. + ΦΠΑ
Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
Use this cable to connect the (discontinued) Phoenix Inverter 12/180, 24/180, 12/350 or 24/350 to a VE.Bus BMS or a BlueSolar MPPT Charger that features a load output:
VE.Bus BMS: the Inverter will be switched off when the batteries is empty
BlueSolar MPPT Charger: connecting an inverter directly on the load output of a BlueSolar MPPT Charger is not possible; the inverter needs to be connected to the battery. Then use this cable to switch the inverter on and off with the load output.
Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged.
This cable is intended for on/off control of the Skylla-i when the source is high when the Skylla-i must be on, and low or free floating when the Skylla-i must be off.
Specifications:
Maximum input voltage: 70V
Minimum input voltage needed for switch on: Approx. 6V
Switch off level: Input voltage must be less than 1V or must be free floating
This cable is designed for lighting applications in solar energy systems. (more applications will follow later). Energy consumption canbe significantly reducedbytheability todimlightingwhen needed. Lower power consumptionwill reduce theoverall system cost. Also,theavailability of the lightingwill increase,even in case ofa partially chargedbatteryin lowsun. The cable connectsthe TXoutputoftheVE.DirectconnectorofanMPPT75/15or100/15with the PWMdimmerinput of theLED driver. The MPPTcharge controllermusthave asoftware version1:15or higher. AMPPT charge controllerwith an oldersoftwareversion can beupdatedfor this
Καλώδιο ρυθμιστή φόρτισης Communication cable CC-USB-TTL-150U για ρυθμιστές φόρτισης, EPsolar LS-BP,LS-BPL,TRACER-BP,TRACER-BPL,DCCP-DP Solar Controller
Αισθητήρας θερμότητας για τους ρυθμιστές φόρτισης BlueSolar PWM-Pro.
Victron Temperature Sensor for the BlueSolar PWM-Pro series. Temperature sensore are only needed if charge controller and battery are exposed to different ambient temperatures, for example because the are in different rooms or the battery’s underground is much cooler than the wall the controller is installed on.
Thanks to the sensor the charge controller can perform a temperature compensation during the charging process that ensures an ideal charge and a long battery life-span.
The temperature sensor is compatible with the following Victron charge controllers:
SCC010010010 Victron BlueSolar PWM-Pro 12V 24V 10A, Art-Nr 1-67-008445
SCC010020110 Victron BlueSolar PWM-Pro 12V 24V 20A, Art-Nr 1-67-008445
SCC010030010 Victron BlueSolar PWM-Pro 12V 24V 30A, Art-Nr 1-67-008445
Delivery scope:
1x Victron Temperature Sensor for BlueSolar PWM-Pro
Ακροδέκτης τύπου Τ για σύνδεση (3) τριών “Θηλυκών” βυσμάτων φωτοβολταικών πάνελ με ένα “Αρσενικό” ( Male)
Solar MC4 branch 3 female to 1 fmale Y piece splitter
Use with strings of panels where the maximum voltage is met for your inverter and you require a second string to add wattage. Or simply use it to connect 3 x 12v /24v panels in parallel to keep a 12v/24v output.
O rings for secure protection from the elements.
Easy, fast “SNAP IN” locking system and the UK industry standard for DC solar connectors.
Αυτό το VE.Direct M8 Καλώδιο BNC male – BNC female μπορεί να χρησιμοποιηθεί για την επέκταση των καλωδίων μεταξύ ενός Smart Battery Lithium και του BMS.
online αγορές, Αποκτήστε το καλώδιο στη πιο φθηνή τιμή της αγοράς. Καλώδιο για BlueSolar MPPT Chargerγια αυτόνομα συστήματα, φωτοβολταϊκά, αιολικά, υβριδικά, με υψηλή απόδοση στη πιο χαμηλή τιμή. online αγορές eshops
